4POS Hardware & Related Questions > 4POS Printer Drivers

4POS Printer drivers

(1/4) > >>

Admin:
Download your 4POS printer drivers here :

For the NEW Improved 58mm printer (Box-shape & blue button on left to open the lid)

Download the 4POS 58mm Driver Now!

New 4POS 60mm Barcode Label Printer Driver :

Download the 4POS 60mm Barcode Printer Driver Now!


New improved 80mm printer with USB, RS232 & LAN interface :

Download the 4POS 80mm Driver Now!

-or -

This is for the original 4POS 58mm & 80mm Printers.


https://4pos.co.za/Software/POSPrinterDriverSetupV717.exe


Setup Tool for 80mm Printers to configure IP address :


Download the 4POS 80mm Printer Tool Now!


Steps :

1. Do a test page on printer to determine current IP address of printer : (Switch printer off - hold finger on feed button then switch on while holding finger down)
2. The test page will show the existing IP address of the printer.
3. Set up PC to be in same range of printer Eg. 192.168.1.100 is printer - setup pc as 192.168.1.101
4. Use Printer Setup tool to change IP of printer to what you use in your network.
5. Change pc back to correct IP (original IP)
6. Install printer normal on PC & then add port (Standard IP port with newly configured IP address)
7. Rename printer to eg. KP

Do steps 6 & 7 on all pc's.

Admin:
For the customers battling with their 4POS printers :

A couple of things to check please:

1. Are you using Thermal paper? (Quick way to check is to scratch the paper with your nail – it should leave a black mark)
2. Also if the paper comes out but blank - your paper is upside down... The paper will feed from the bottom of the roll.
3. Does the paper feed when you press the feed button?
4. Is the lid properly closed? If not – Open the lid & press closed firmly – Don’t smash it….
5. Do a printer self-test : Switch the printer off. Hold the Feed button & switch the printer on while holding the feed button. Release the feed button – it should print a self-test. If this works – switch the printer off & try again from Windows.
6. Lastly – remember that Windows does not automatically detect the USB port you are using. Go into the printer properties & ensure the port is set to “Virtual printer port” – If there is more than one – try the others.

Worst case scenario – use our voice prompts on 010-500-4176 - option 1 (Support options).

Admin:
Some booklets to help you even more :

4POS 58mm Thermal Printer :

http://www.4pos.co.za/support/58mmBooklet-Front.pdf

4POS 80mm Thermal Printer :

http://www.4pos.co.za/support/80mmBooklet-Front.pdf

4POS Printer Driver Installation :

http://www.4pos.co.za/support/58mmBooklet-Back.pdf

4POS laser Scanner Booklet :

http://www.4pos.co.za/support/LaserBooklet-Front.pdf

Admin:
Some videos to assist with the Installations :

4POS 58mm Printer :

https://www.youtube.com/watch?v=IHSYgeQj4ew

4POS 60mm Printer :

https://www.youtube.com/watch?v=-xk3JXkBgYQ&list=PLEst5YWBTaV4a6zhCXg5REhVWsuiqxojo

4POS 80mm Printer :

https://www.youtube.com/watch?v=ivojAVoUHyM

4POS Laser Scanner :

https://www.youtube.com/watch?v=w-2HgtfFQZQ

4POS Software getting Started :

https://www.youtube.com/watch?v=HbeNXMP9egE&list=PLEst5YWBTaV6_vCMIPqMzrQvR7xxYj8bM

Admin:
Windows 10 - what have they done now???

Lots of issues with the Windows 10 upgrades that happened in the last couple of days!

1. Suddenly network cards dont work anymore
2. VGA drivers that make 4POS screens not display...
3. 80mm Printer drivers suddenly not recognised!

Well, at least we have a solution for the 58mm & 80mm Thermal printer now...

New driver for Windows 7, 8 & 10 uploaded.

Navigation

[0] Message Index

[#] Next page